6063 aluminum angle bar for marine application

Angular aluminum, also known as aluminum angle bar , is an industrial aluminum profile with an angle of 90 perpendicular. It can be divided into equilateral aluminum and equilateral aluminum according to the ratio of side length. The sides of the equilateral angle aluminum are equal in width. The specifications are expressed in millimeters of side width × side width × side thickness. For example, "∠30×30×3" means an equilateral angle aluminum with a side width of 30 mm and a side thickness of 3 mm. It can also be expressed by model number, the model number is the number of centimeters of the side width, such as ∠3#. The model does not indicate the size of the different side thicknesses in the same model. Therefore, the side width and thickness of the angle aluminum are filled in the contract and other documents, so as to avoid the model number. According to the processing method, it can be divided into aluminum plate bending angle aluminum and extrusion angle aluminum profile. It should be noted that the aluminum plate bending angle aluminum strength is far lower than the pressure profile angle aluminum.
Specification of angle aluminum: usually measured in mm, such as 100mm on one side, 200mm on the other side, and angle aluminum with a thickness of 5mm. We usually mark 100×500×5.
The 6063 aluminum angle bar produced by Chalco can be used for the construction of the bottom structure of the ship, and it is an important type of marine aluminum profile.Chalco aluminum can not only provide CS, DNV, GL, LR, ABS, BV and other class certificate, but also has a large number of angle aluminum molds, which can save  customers’ time and money.